产品展示
联系我们
- 地址：上海市闵行区东川路555号（数码港）5号楼7018室 QQ: 2940282038
- 电话：86-021-52969808
- 传真：86-021-52969809
- 联系人：魏先生
- 手机：18918173136
- 邮箱：weizunlai@126.com
产品展厅
Chromolith® HighResolution RP-18 endcapped 100-4.6
| 物品单位 | 价格 | 品牌 |
|---|---|---|
| 件 | 7877.355 | 西格玛(Sigma-Aldrich) |
- 型号：1件
- 货号：1.52022
- 发布日期： 2022-03-21
- 更新日期： 2023-06-02
产品详细说明
| 分辨率 | |
| 重量 | |
| 品牌 | 西格玛(Sigma-Aldrich) |
| 货号 | 1.52022 |
| 电源电压 | |
| 型号 | RP-18 endcapped |
| 测量范围 | |
| 规格 | 1件 |
| 加工定制 | 否 |
| 外形尺寸 | 10 cm × 4.6 mm |
| 测量精度 |
Chromolith® HighResolution RP-18 endcapped 100-4.6 HPLC column
一般描述
All Chromolith® columns are made of monolithic silica with a characteristic bimodal pore structure. Chromolith® HighResolution 2 mm I.D. columns have macropores with 1.15 μm diameter, giving a column efficiency exceeding 140,000 plates/meter. The mesopores are 15 nm (150 ?), the surface modification is octadecylsilan with full end-capping.
The revolutionary, monolithic silica with its unique combination of macropores and mesopores enable:
The revolutionary, monolithic silica with its unique combination of macropores and mesopores enable:
- Rapid separations at very low column back-pressure
- High matrix tolerance, allowing time and cost savings with simplified workflows
- Cost-savings due to extended column lifetimes
- Connection of columns, flow gradients and the use of mobile phases with higher viscosity
- UHPLC instruments are fully compatible with Chromolith® 2 mm i.d. columns
All Chromolith® HighResolution columns are made of monolithic silica with a characteristic bimodal pore structure. Chromolith 4.6 mm columns have macropores with 1.15 μm diameter, giving a column efficiency exceeding 140,000 plates/meter. The mesopores are 15 nm (150 ?), the surface modification is octadecylsilan with full end-capping.
分析说明
Appearance: passes test
Pressure: 40 - 70 bar
stability testing: passes test
Performance (anthracene)
Theoretical Plates (N/m) (Anthracene): ≥ 140000
Capacity factor (Anthracene): 3.9 - 4.6
Tailing (USP): 0.90 - 1.30 %
Selectivity
separation factor (anthracene/progesterone): 1.95 - 2.35
Pressure: 40 - 70 bar
stability testing: passes test
Performance (anthracene)
Theoretical Plates (N/m) (Anthracene): ≥ 140000
Capacity factor (Anthracene): 3.9 - 4.6
Tailing (USP): 0.90 - 1.30 %
Selectivity
separation factor (anthracene/progesterone): 1.95 - 2.35
